Sodium Iodide liquid filter for checking stray light (cut-off 259 nm)

The sodium iodide liquid filter (UV10) consists of 10 g/l sodium iodide in pure water. This filter is suited to check the stray light of a spectrometer in the spectral range between 210 nm and 270 nm, its cut off is at about 259 nm.

Two regulations - two measuring methods
Currently there are different methods used in the European Pharmacopoeia (EP) and in the United States Pharmacopeia (USP) to determine the stray light.

Checking stray light according to European Pharmacopoeia

When checking for stray light according to Ph. Eur., the sodium iodide filter (UV10) is measured against the reference filter (UV12) filled with pure water. The measured absorbance value at the wavelength 220 nm must be ≥ 3.0 Abs.
 

Checking stray light according to United States Pharmacopeia

In USP <857> (update Dec. 2022), two possible procedures are described for checking for stray light:

Procedure A
Here the sodium iodide filter (UV10) with a path length of 10 mm is measured against the sodium iodide reference filter (UV10H) with a path length of 5 mm. The stray light value can now be calculated from the absorbance maximum obtained, using the following formula:
Sλ = 0.25 x 10-2∆A
The following acceptance criteria apply:
∆A ≥ 0.7 Abs and Sλ ≤ 0.01

Procedure B
Here the sodium iodide filter (UV10) with a path length of 10 mm is measured against the reference filter (UV12) filled with pure water. The measured absorbance value at the recommended wavelength 220 nm should be ≥ 2.0 Abs.

Note
Procedure B of USP 857 corresponds to the procedure of the European Pharmacopoeia

 

Note on procedure A according to USP

Experiences from daily practice show that the values determined in this stray light measuring method are instrument-dependent. This means the wavelength of the peak varies depending on the spectrophotometer performance. It is important for the user to know that the measured maximum absorption in the checked range is decisive for this checking method and that it should be higher than 0.7 Abs.

ARTICLE-NO. EP-Set: 667101 (UV10/UV12)      Request this article
USP-Set: 667101H (UV10/UV10H)    
APPLICATION Checking stray light in the spectral range of 210 - 270 nm according to EP and USP
CONTENT Sodium Iodide 10 g/l in pure water
STANDARD MEASUREMENT Cut-off wavelength: 259 nm
Slit width: 2 nm; with DAkkS calibration certificate
POSSIBLE MEASUREMENTS Cut-off wavelength: fix
Slit width: 1 and 2 nm

 

Image

Optical Reference Materials (Brochure & User Manual EN)

Download

Contact/Inquiry

Hellma USA Inc.
120 Terminal Drive
11803 Plainview, NY
United States

Phone: +1 5169 3908 88
info.us@hellma.com
www.hellmausa.com

Contact/Inquiry

Disabled, please use email.

Contact